AMCC 3WARE 9590SE Guía de instalación descargar pdf (Pagina 10)

Chapter 1. Installing an AMCC 3ware 9590SE RAID Controller

6 3ware 9590SE Serial ATA RAID Controller Quick Install Guide

Protecting Equipment and Data

Backing Up Your Data

Back up your data! Creating or deleting disk arrays

destroys existing files on the member drives. If your drives

contain valuable data, back them up and save the data

elsewhere before attaching the drives to the controller.

ESD (Electrostatic Discharge) Precautions

To avoid damaging computer components and accessories when

installing or removing the 3ware RAID controller, follow standard

electrostatic discharge (ESD) precautions:

 When your computer case is open and its internal parts are

exposed, do not touch any internal part unnecessarily.

 Always wear a grounded strap or work on an ESD-protective

mat.

 Do not remove the 3ware RAID controller from its protective

bag until you are properly grounded.

 Handle the 3ware RAID controller by its edges or by the black

rail and metal bracket at its two ends.

 Do not touch any pin, contact, lead or component on the 3ware

RAID controller.

Things to Watch Out For

Be careful when installing the 3ware RAID controller into your

system. Excessive force can damage the board or your system.

 Be sure you insert the board into a PCI Express slot, not a

PCI-X slot.

 Be sure the board is aligned with its slot on the motherboard

before installing. Do not flex the board excessively.

 Once the board is inserted into the PCI Express slot, make sure

the board is seated correctly. If the board is not plugged in

correctly, it will not work.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Sin comentarios

AMCC 3WARE 9590SE Guía de instalación Pagina 10