AMCC 3WARE 9590SE Guía de instalación descargar pdf (Pagina 14)

Chapter 1. Installing an AMCC 3ware 9590SE RAID Controller

10 3ware 9590SE Serial ATA RAID Controller Quick Install Guide

Multilane Cables

Important: Be sure to use AMCC/3ware certified cables

with your 3ware RAID controller. Using an incorrect cable

can result in drives that are not detected. For a list of

available cables and associated part numbers, see

http://3ware.com/products/cables.asp.

Three types of multilane cables can be used with 3ware 9590SE

RAID controllers.

 Multilane breakout cables

For use with a backplane that has individual SATA connectors

or individual serial ATA drives, multilane breakout cables have

an SFF-8087 multilane connector on one end and four

individual SATA connectors on the other end.

Note: This is the type of cable that ships with the 3ware

9590SE controller. Depending on the enclosure you are using,

you may need to purchase a different cable to connect the

9590SE controller and the enclosure backplane

Figure 4. Multi-lane Serial ATA Break-out Cable (SFF-8087)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sin comentarios

AMCC 3WARE 9590SE Guía de instalación Pagina 14