AMCC 3WARE 9590SE Guía de instalación descargar pdf (Pagina 9)

Safety Factors

www.3ware.com 5



When to install the drives. If the drives are not already

installed in your computer, you can choose to install them

either before or after installing the 9590SE controller. In either

case, be sure to connect the SATA cable from the drive to the

controller and connect the drive to power before turning on the

system or you will not be able to see or configure the drives.

What You Need: Tools and Equipment

Tools Required

You will need the following tools during installation:

 An ESD grounding strap or mat

 Standard hand tools to open your system’s case and install the

3ware RAID controller into an available PCI Express

expansion slot. Often a Phillips screwdriver is all that is

required.

Safety Factors

Be sure to follow the guidelines presented on the next few pages to

insure your own safety, and that of your equipment.

Personal Safety

Warning! High voltages may be found inside computer

equipment.

Before installing any of the hardware in this package or

removing the protective covers of any computer

equipment, turn off power switches and disconnect

power cords. Do not reconnect the power cords until the

hardware is installed and the system cover is closed.

Caution. Avoid contact with the heat sink if the system or

server is in operation, as the heat sink will be very hot. The

heat sink will be safe to touch after the server or system is

powered down and the cover has been removed for a few

minutes.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Sin comentarios

AMCC 3WARE 9590SE Guía de instalación Pagina 9