AMCC 9000 Manual de usuario descargar pdf (Pagina 28)

Installing the Hardware

20 3ware 9000 Series Serial ATA RAID Controller Installation Guide

Figure 6. Multi-lane Cable (InfiniBand 4x, SFF-8470)



For use with a backplane that has individual SATA connectors

or individual serial ATA drives, use the break-out cable, which

has a multi-lane connector on one end, and four individual

SATA connectors on the other end.

To connect the multi-lane cables

Depending on the model of the controller and the number of drives

you will be connecting, you will connect two or three multi-lane

cables. Each cable supports up to four serial ATA ports.

1 Connect each interface cable to a multi-lane connector on the

controller. See

Figure 5.

When the cable is inserted correctly, you will feel it click into

place.

2 If your enclosure has a backplane, connect the other end of each

interface cable to the backplane.

If you are using a standard enclosure, connect each of the

individual SATA connectors to a drive.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 125 126

Sin comentarios

AMCC 9000 Manual de usuario Pagina 28