AMCC 9000 Manual de usuario descargar pdf (Pagina 63)

Installing the 3ware Driver and Windows on a New Unit

www.3ware.com 55

3 In the 3ware Driver & Firmware Images menu, click the

appropriate button to create the driver diskette that you need.

Note that there are both 32-bit and 64-bit AMD drivers

available for Windows. Be sure to select the correct one.

4 When the confirm message appears, insert a blank diskette into

a floppy drive and click the Yes button to begin the process.

Installing the 3ware Driver and

Windows on a New Unit

If you want to install Windows on a new drive configuration

managed by the 3ware RAID controller, follow the instructions in

this section.

If Windows is already installed on another drive, turn to “Installing

the Driver on a System that Boots from a Different Device” on

page 56.

To install Windows and the 3ware driver

1 Boot from the Windows 2000, Windows XP, or Windows

Server 2003 CD and press F6 when you see the message:

“Press F6 if you need to install a 3rd party SCSI or RAID

driver” at the bottom of the display.

2 When you see the message: “Setup could not determine the

type of one or more mass storage devices or you have chosen to

manually specify an adapter…”

Type S to specify that you have an additional 3ware RAID

controller.

3 Insert the 3ware driver diskette and press Enter.

4 When a box with AMCC 3ware Series ATA RAID Controller

appears, press Enter to select it.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 125 126

Sin comentarios

AMCC 9000 Manual de usuario Pagina 63