AMCC 3WARE 9500S Guía de usuario descargar pdf (Pagina 119)

Setting Unit Policies

www.3ware.com 109

To enable or disable unit write cache through 3BM

1 At the main 3BM screen, select the unit by highlighting it and pressing

Enter.

An asterisk appears in the left-most column to indicate that it is selected.

Tab to the Maintain Unit button and press Enter.

3 On the pop-up menu, select Configure and press Enter.

4 In the Configure Disk Array screen,

Tab to the field Write Cache

Settings

Figure 53. Unit Write Cache State in 3BM

The current setting—Enabled or Disabled—is shown. (The initial default

setting is for write cache to be enabled.)

5 Press

Enter to display the choices, use the arrow keys to select the

setting you want, and press

Enter again to choose it.

6Tab to the

OK button and press Enter to select it.

You return to the main 3BM screen.

7 When you are finished making changes, press

F8 to save them and exit

3BM.

Setting Auto Verify for a Unit

The Auto Verify policy causes verify tasks to be performed automatically.

This feature is designed to make verification of units easier.

If Auto Verify is set and there is no schedule set up for verify tasks, then the

controller firmware can initiate a verify task once every 24 hours. If verify

time windows are scheduled, then the controller will only start an automatic

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 301 302

Sin comentarios

AMCC 3WARE 9500S Guía de usuario Pagina 119