AMCC 3WARE 9500S Guía de usuario descargar pdf (Pagina 191)

Updating the Firmware and Driver

www.3ware.com 181

11 Stop the current driver module, if loaded:

rmmod 3w-9xxx

12 Load the new driver module:

modprobe 3w-9xxx

If the new driver fails to load properly, confirm that you used correct driver. If

your kernel or SuSE version is not supported, you will need to compile your

own driver. For more information, see knowledgebase article 14546 (http://

www.3ware.com/KB/article.aspx?id=14546).

Updating the 3ware Driver Under FreeBSD

The following steps describe how to update the 3ware driver under FreeBSD.

To update the 3ware driver under FreeBSD

1 Download and extract the driver, as described under “Downloading the

Driver and Firmware” on page 165.

2 Backup any critical data prior to updating the 3ware driver.

3 Change the directory to the location with the extracted driver.

4 Copy the files to the appropriate directory.

For FreeBSD 4.x, copy the driver into

/modules

For FreeBSD 5.x and 6.x, copy the driver into

/boot/kernel.

5 Load the driver

kldload twa.ko

If units are present, you should see unit information in the system

log (usually,

/var/log/messages).

If you wish to load the driver automatically every

time the system is rebooted,

add the line 'twa_load="YES"' to

the file

/boot/loader.conf

Backup your original driver before updating in case you need to revert back to it.

However, you will not be able to revert back to the original driver if you are booting

from that unit.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 301 302

Sin comentarios

AMCC 3WARE 9500S Guía de usuario Pagina 191