AMCC 3WARE 9500S Guía de usuario descargar pdf (Pagina 223)

Enclosure Summary page

www.3ware.com 213

generated based on the measured temperature. In the case of a temperature

error, the BBU status will change to “Fault” and the battery will be

disconnected electronically.

Estimated Backup Capacity. Indicates the estimated backup capacity in

hours. This is the amount of time that the battery backup unit can protect the

data in the 3ware RAID controller's cache memory. This field is set to zero at

the start of a new test and is updated after the test completes. A capacity of

zero will also show if the BBU is disconnected and then reconnected.

Under optimal conditions, a battery can protect for up to 72 hours. However,

with a fresh battery, you may see a higher number in this field. As the battery

ages, the backup capacity diminishes.

Last Capacity Test. Indicates the date when the last battery test was

completed. To test the battery click the

Test Battery Capacity link. For

details, see “Testing Battery Capacity” on page 183.

Battery Installation Date. Indicates when the BBU last detected the battery

pack was removed and replaced.

Enclosure Summary page

Figure 101. Enclosure Summary Page

The Enclosure Summary page appears when you choose Enclosure >

Enclosure Summary

from the menu bar.

The Enclosure Summary page provides basic information about any

enclosures attached to your system.

ID. The ID that the 3ware firmware assigns to the enclosure.

Slots. The number of slots in the enclosure.

Drives. The number of drives in the enclosure.

Fans. The number of fans in the enclosure.

Temp Sensor. The number of the temperature sensor in the enclosure.

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 301 302

Sin comentarios

AMCC 3WARE 9500S Guía de usuario Pagina 223