AMCC 3ware 9650SE-2LP Guía de usuario descargar pdf (Pagina 14)

Introducing the 3ware® SAS/SATA RAID Controller

2 3ware SAS/SATA RAID Software User Guide, Version 9.5.1

• Support for the I

C-MUX-SM1 on the 9690SA

• 8th-generation StorSwitch™ non-blocking switch fabric for maximum

controller output

• Simultaneous RAID 6 parity generation to maximize RAID 6

performance

• StreamFusion™ optimizes RAID 5 and RAID 6 disk accesses to

maximize application performance under heavy loads

• StorSave™ BBU with write journaling optimizes data protection and

performance

• RAID levels 0, 1, 5, 6, 10, 50, and Single Disk

(RAID 6 and RAID 50 are available only with 3ware RAID controller

models that have 8 or more ports)

• Support for storage enclosures

• With the 9690SA models:

• PCI Express® x8

• Dual-ported SAS drive support

• Ability to have SAS and/or SATA drives on the same controller

• Connectivity with up to 128 single-ported drives or 64 dual-ported

drives

• Up to 32 drives in a unit

• Up to 32 active units

• Up to 4 SAS enclosures with expanders

• With the 9650SE models:

• Choice of 2, 4, 8, 12, 16, or 24 SATA ports

• PCI Express® x1, x4 and x8

System Requirements

3ware 9690SA and 9650SE model RAID controllers have the following

requirements:

Motherboard and Slot Requirements

A workstation-class or server-class motherboard, with an available PCI

Express x8 or x16 slot that complies with PCI 1.1 or later. (Some versions of

the 9650SE can use PCI Express x1 and x4 slots).

A list of motherboards that have been tested is available at

http://www.3ware.com/products/sys_compatibility.asp

A workstation-class or server-class motherboard, with slots that support the

specific 3ware RAID controller model, as shown in Table 2.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 360 361

Sin comentarios

AMCC 3ware 9650SE-2LP Guía de usuario Pagina 14