AMCC 3ware 9650SE-2LP Guía de usuario descargar pdf (Pagina 57)

Driver Installation Under Linux

www.3ware.com 45

Installing the 3ware Kernel Driver Module while

Installing Red Hat Linux on a New Unit

To install the 3ware kernel driver module while installing Red Hat

or Fedora Core Linux on a new unit

1 Boot with the Red Hat or Fedora Core DVD or CD:

a Insert the Red Hat DVD or CD-ROM disk into your computer.

b Make sure the boot order in your motherboard’s BIOS is correct; then

start or reboot your computer.

c When the Welcome to Red Hat display appears, type:

linux dd

A number of files will load and then a message will prompt you to

insert your driver install disk.

4 Install the 3ware kernel driver module, using the driver install diskette:

Insert the driver install diskette containing the 3ware driver for Red Hat

and press Enter.

The system automatically reports:

Loading 3w-9xxx

5 When prompted, select the proper language and keyboard types for your

locality.

6 If asked for what type of media, select Local CD-ROM since you are

installing from the Red Hat CD-ROM.

7 After installation completes, remove media (CD and floppy disks).

Note: If Red Hat Linux is already installed and bootable on another drive, turn to

“Installing the 3ware Kernel Driver Module on a Red Hat or Fedora Core Linux

System that Boots From a Different Device” on page 46.

Note: We have tested some older systems where a drive connected to the

motherboard interfered with using a drive or unit managed by the 3ware RAID

controller as a boot device. Disconnecting the drive while installing Linux will

eliminate this problem. After Linux is installed, the drive can be reconnected.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 360 361

Sin comentarios

AMCC 3ware 9650SE-2LP Guía de usuario Pagina 57