AMCC 3ware 9650SE-2LP Guía de usuario descargar pdf (Pagina 245)

Maintenance page

www.3ware.com 233

Unit Number. The unit number assigned to the unit by the firmware. Use the

checkbox next to the unit to select a unit before clicking one of the task

buttons.

# Drives. Number of drives in the unit.

Type of Unit. Type of unit: RAID 0, RAID 1, RAID 5, RAID 6, RAID 10,

RAID 50, Single Disk, or Spare. If the unit has been given a unique name, it

shows beneath the RAID type.

Name of Unit. User-assigned unique name of the unit. The default setting is

blank.

Capacity. The usable capacity (size) of the unit.

Status. Operational status of the unit: Ok, Rebuilding, Initializing, Verifying,

Migrating, Degraded, or Inoperable (missing drives). When Rebuilding,

Initializing, Migrating, or Verifying, the percentage (%) complete is also

shown. The percentage complete can be active or paused. To see whether this

task is currently active or paused, click on the unit number to display the Unit

Details page, which has that information. For an explanation of the statuses,

see “Unit Statuses” on page 150.

Drive Information

VPort. The VPort (virtual port) to which the drive is connected.

Model. The model of the drive.

Capacity. The capacity (size) of the drive.

Status. The status of the drive: OK, Not Supported, Not Present, and so forth.

If you need help regarding a status displayed here, please contact Technical

Support. For more information, see “Drive Statuses” on page 151.

Remove Drive. The Remove Drive link removes a drive from the controller

so that you can safely unplug it. In the Unit Maintenance section, this link is

only provided for drives that can be safely removed without creating an

inoperable unit. (For example, a RAID 5 missing 2 or more drives or a RAID

0 missing 1 or more drives would become inoperable.) If you remove a drive

from a redundant unit, the unit will become degraded. Once a unit has become

degraded, additional drives cannot be removed without making it inoperable,

so no

Remove Drive link will display.

Warning: Physically removing drives which are not in hot swap bays can result in

a system hang, data loss, or may even damage the system and the drive.

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 360 361

Sin comentarios

AMCC 3ware 9650SE-2LP Guía de usuario Pagina 245