AMCC 3WARE 9590SE Guía de usuario descargar pdf (Pagina 59)

Controller Object Commands

www.3ware.com 53

To set up the rebuild schedule you want to use, follow this

process:

1 Use the /cx show rebuild command to display the current schedule for

rebuild tasks. (For details, see page 41.)

2 If any of the scheduled tasks do not match your desired schedule, use the

/cx del rebuild command to remove them. (For details, see page 55.)

3Use the /cx add rebuild command to create the rebuild schedule slots you

want (described above.)

4 Use the /cx set rebuild=enable command to enable the schedule (this

enables all rebuild schedule slots). (For details, see page 55.)

add verify=

ddd:hh:duration

This command adds a new background verify task to be executed on the day

ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at hour hh

(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of

seven verify tasks can be scheduled. This command will fail if no (empty)

task slot is available.

Example:

//localhost> /c1 add verify=Sun:16:3

adds a verify background task schedule to be executed on Sundays at 16

hours (4:00 PM) for a duration of 3 hours.

Setting Up a Verify Schedule

Setting up a verify schedule requires several steps, and several different CLI

commands in addition to /cx add verify.

To set up the verify schedule you want to use, follow this

process:

1 Use the /cx show verify command to display the current schedule for

verify tasks. (For details, see page 45.)

2 If any of the scheduled tasks do not match your desired schedule, use

the /cx del verify command to remove them. (For details, see page 55.)

3 Use the /cx add verify command to create the verify schedule slots you

want (described above.)

Warning: If all time slots are removed, be sure to also disable the schedule.

Otherwise the applicable background task will never occur.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 109 110

Sin comentarios

AMCC 3WARE 9590SE Guía de usuario Pagina 59